Writing administration tools scripts

You can invoke most Administration Tools from the command line or a shell script.

You can invoke most Administration Tools from the command line or a shell script.

Syntax

/opt/vertica/bin/admintools {
     { -h | --help }
   | { -a | --help_all}
   | { [--debug ] { -t | --tool } toolname [ tool-args ] }
}

Parameters

-h
-help
Outputs abbreviated help.
-a
-help_all
Outputs verbose help, which lists all command-line sub-commands and options.
[debug] { -t | -tool }toolname [args] Specifies the tool to run, where toolname is one of the tools listed in the help output described below, and args is one or more comma-delimited toolname arguments. If you include the debug option, Vertica logs debug information during tool execution.

Tools

To return a list of all available tools, enter admintools -h at a command prompt.

To display help for a specific tool and its options or commands, qualify the specified tool name with --help or -h, as shown in the example below:

$ admintools -t connect_db --help
Usage: connect_db [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to connect
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes

To list all available tools and their commands and options in individual help text, enter admintools -a.

Usage:
    adminTools [-t | --tool] toolName [options]
Valid tools are:
                command_host
                connect_db
                create_db
                db_add_node
                db_add_subcluster
                db_remove_node
                db_remove_subcluster
                db_replace_node
                db_status
                distribute_config_files
                drop_db
                host_to_node
                install_package
                install_procedure
                kill_host
                kill_node
                license_audit
                list_allnodes
                list_db
                list_host
                list_node
                list_packages
                logrotate
                node_map
                re_ip
                rebalance_data
                restart_db
                restart_node
                restart_subcluster
                return_epoch
                revive_db
                set_restart_policy
                set_ssl_params
                show_active_db
                start_db
                stop_db
                stop_host
                stop_node
                stop_subcluster
                uninstall_package
                upgrade_license_key
                view_cluster
-------------------------------------------------------------------------
Usage: command_host [options]

Options:
  -h, --help            show this help message and exit
  -c CMD, --command=CMD
                        Command to run
  -F, --force           Provide the force cleanup flag. Only applies to start,
                        restart, condrestart. For other options it is ignored.
-------------------------------------------------------------------------
Usage: connect_db [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to connect
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
-------------------------------------------------------------------------
Usage: create_db [options]

Options:
  -h, --help            show this help message and exit
  -D DATA, --data_path=DATA
                        Path of data directory[optional] if not using compat21
  -c CATALOG, --catalog_path=CATALOG
                        Path of catalog directory[optional] if not using
                        compat21
  --compat21            (deprecated) Use Vertica 2.1 method using node names
                        instead of hostnames
  -d DB, --database=DB  Name of database to be created
  -l LICENSEFILE, --license=LICENSEFILE
                        Database license [optional]
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes [optional]
  -P POLICY, --policy=POLICY
                        Database restart policy [optional]
  -s HOSTS, --hosts=HOSTS
                        comma-separated list of hosts to participate in
                        database
  --shard-count=SHARD_COUNT
                        [Eon only] Number of shards in the database
  --communal-storage-location=COMMUNAL_STORAGE_LOCATION
                        [Eon only] Location of communal storage
  -x COMMUNAL_STORAGE_PARAMS, --communal-storage-params=COMMUNAL_STORAGE_PARAMS
                        [Eon only] Location of communal storage parameter file
  --depot-path=DEPOT_PATH
                        [Eon only] Path to depot directory
  --depot-size=DEPOT_SIZE
                        [Eon only] Size of depot
  --force-cleanup-on-failure
                        Force removal of existing directories on failure of
                        command
  --force-removal-at-creation
                        Force removal of existing directories before creating
                        the database
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
-------------------------------------------------------------------------
Usage: db_add_node [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of the database
  -s HOSTS, --hosts=HOSTS
                        Comma separated list of hosts to add to database
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  -a AHOSTS, --add=AHOSTS
                        Comma separated list of hosts to add to database
  -c SCNAME, --subcluster=SCNAME
                        Name of subcluster for the new node
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
  --compat21            (deprecated) Use Vertica 2.1 method using node names
                        instead of hostnames
-------------------------------------------------------------------------
Usage: db_add_subcluster [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to be modified
  -s HOSTS, --hosts=HOSTS
                        Comma separated list of hosts to add to the subcluster
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  -c SCNAME, --subcluster=SCNAME
                        Name of the new subcluster for the new node
  --is-primary          Create primary subcluster
  --is-secondary        Create secondary subcluster
  --control-set-size=CONTROLSETSIZE
                        Set the number of nodes that will run spread within
                        the subcluster
  --like=CLONESUBCLUSTER
                        Name of an existing subcluster from which to clone
                        properties for the new subcluster
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
-------------------------------------------------------------------------
Usage: db_remove_node [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to be modified
  -s HOSTS, --hosts=HOSTS
                        Name of the host to remove from the db
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
  --compat21            (deprecated) Use Vertica 2.1 method using node names
                        instead of hostnames
  --skip-directory-cleanup
                        Caution: this option will force you to do a manual
                        cleanup. This option skips directory deletion during
                        remove node. This is best used in a cloud environment
                        where the hosts being removed will be subsequently
                        discarded.
-------------------------------------------------------------------------
Usage: db_remove_subcluster [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to be modified
  -c SCNAME, --subcluster=SCNAME
                        Name of subcluster to be removed
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
  --skip-directory-cleanup
                        Caution: this option will force you to do a manual
                        cleanup. This option skips directory deletion during
                        remove subcluster. This is best used in a cloud
                        environment where the hosts being removed will be
                        subsequently discarded.
-------------------------------------------------------------------------
Usage: db_replace_node [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of the database
  -o ORIGINAL, --original=ORIGINAL
                        Name of host you wish to replace
  -n NEWHOST, --new=NEWHOST
                        Name of the replacement host
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
-------------------------------------------------------------------------
Usage: db_status [options]

Options:
  -h, --help            show this help message and exit
  -s STATUS, --status=STATUS
                        Database status UP,DOWN or ALL(list running dbs -
                        UP,list down dbs - DOWN list all dbs - ALL
-------------------------------------------------------------------------
Usage: distribute_config_files
Sends admintools.conf from local host to all other hosts in the cluster

Options:
  -h, --help  show this help message and exit
-------------------------------------------------------------------------
Usage: drop_db [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Database to be dropped
-------------------------------------------------------------------------
Usage: host_to_node [options]

Options:
  -h, --help            show this help message and exit
  -s HOST, --host=HOST  comma separated list of hostnames which is to be
                        converted into its corresponding nodenames
  -d DB, --database=DB  show only node/host mapping for this database.
-------------------------------------------------------------------------
Usage: admintools -t install_package --package PACKAGE -d DB -p PASSWORD
Examples:
admintools -t install_package -d mydb -p 'mypasswd' --package default
    # (above) install all default packages that aren't currently installed

admintools -t install_package -d mydb -p 'mypasswd' --package default --force-reinstall
   # (above) upgrade (re-install) all default packages to the current version

admintools -t install_package -d mydb -p 'mypasswd' --package hcat
   # (above) install package hcat

See also: admintools -t list_packages

Options:
  -h, --help            show this help message and exit
  -d DBNAME, --dbname=DBNAME
                        database name
  -p PASSWORD, --password=PASSWORD
                        database admin password
  -P PACKAGE, --package=PACKAGE
                        specify package or 'all' or 'default'
  --force-reinstall     Force a package to be re-installed even if it is
                        already installed.
-------------------------------------------------------------------------
Usage: install_procedure [options]

Options:
  -h, --help            show this help message and exit
  -d DBNAME, --database=DBNAME
                        Name of database for installed procedure
  -f PROCPATH, --file=PROCPATH
                        Path of procedure file to install
  -p OWNERPASSWORD, --password=OWNERPASSWORD
                        Password of procedure file owner
-------------------------------------------------------------------------
Usage: kill_host [options]

Options:
  -h, --help            show this help message and exit
  -s HOSTS, --hosts=HOSTS
                        comma-separated list of hosts on which the vertica
                        process is to be killed using a SIGKILL signal
  --compat21            (deprecated) Use Vertica 2.1 method using node names
                        instead of hostnames
-------------------------------------------------------------------------
Usage: kill_node [options]

Options:
  -h, --help            show this help message and exit
  -s HOSTS, --hosts=HOSTS
                        comma-separated list of hosts on which the vertica
                        process is to be killed using a SIGKILL signal
  --compat21            (deprecated) Use Vertica 2.1 method using node names
                        instead of hostnames
-------------------------------------------------------------------------
Usage: license_audit --dbname DB_NAME [OPTIONS]
Runs audit and collects audit results.

Options:
  -h, --help            show this help message and exit
  -d DATABASE, --database=DATABASE
                        Name of the database to retrieve audit results
  -p PASSWORD, --password=PASSWORD
                        Password for database admin
  -q, --quiet           Do not print status messages.
  -f FILE, --file=FILE  Output results to FILE.
-------------------------------------------------------------------------
Usage: list_allnodes [options]

Options:
  -h, --help  show this help message and exit
-------------------------------------------------------------------------
Usage: list_db [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to be listed
-------------------------------------------------------------------------
Usage: list_host [options]

Options:
  -h, --help  show this help message and exit
-------------------------------------------------------------------------
Usage: list_node [options]

Options:
  -h, --help            show this help message and exit
  -n NODENAME, --node=NODENAME
                        Name of the node to be listed
-------------------------------------------------------------------------
Usage: admintools -t list_packages [OPTIONS]
Examples:
admintools -t list_packages                               # lists all available packages
admintools -t list_packages --package all                 # lists all available packages
admintools -t list_packages --package default             # list all packages installed by default
admintools -t list_packages -d mydb --password 'mypasswd' # list the status of all packages in mydb

Options:
  -h, --help            show this help message and exit
  -d DBNAME, --dbname=DBNAME
                        database name
  -p PASSWORD, --password=PASSWORD
                        database admin password
  -P PACKAGE, --package=PACKAGE
                        specify package or 'all' or 'default'
-------------------------------------------------------------------------
Usage: logrotateconfig [options]

Options:
  -h, --help            show this help message and exit
  -d DBNAME, --dbname=DBNAME
                        database name
  -r ROTATION, --rotation=ROTATION
                        set how often the log is rotated.[
                        daily|weekly|monthly ]
  -s MAXLOGSZ, --maxsize=MAXLOGSZ
                        set maximum log size before rotation is forced.
  -k KEEP, --keep=KEEP  set # of old logs to keep
-------------------------------------------------------------------------
Usage: node_map [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  List only data for this database.
-------------------------------------------------------------------------
Usage: re_ip [options]

Replaces the IP addresses of hosts and databases in a cluster, or changes the
control messaging mode/addresses of a database.

Options:
  -h, --help            show this help message and exit
  -f MAPFILE, --file=MAPFILE
                        A text file with IP mapping information. If the -O
                        option is not used, the command replaces the IP
                        addresses of the hosts in the cluster and all
                        databases for those hosts. In this case, the format of
                        each line in MAPFILE is: [oldIPaddress newIPaddress]
                        or [oldIPaddress newIPaddress, newControlAddress,
                        newControlBroadcast]. If the former,
                        'newControlAddress' and 'newControlBroadcast' would
                        set to default values. Usage: $ admintools -t re_ip -f
                        <mapfile>
  -O, --db-only         Updates the control messaging addresses of a database.
                        Also used for error recovery (when re_ip encounters
                        some certain errors, a mapfile is auto-generated).
                        Format of each line in MAPFILE: [NodeName
                        AssociatedNodeIPaddress, newControlAddress,
                        newControlBrodcast]. 'NodeName' and
                        'AssociatedNodeIPaddress' must be consistent with
                        admintools.conf. Usage: $ admintools -t re_ip -f
                        <mapfile> -O -d <db_name>
  -i, --noprompts       System does not prompt for the validation of the new
                        settings before performing the re_ip operation. Prompting is on
                        by default.
  -T, --point-to-point  Sets the control messaging mode of a database to
                        point-to-point. Usage: $ admintools -t re_ip -d
                        <db_name> -T
  -U, --broadcast       Sets the control messaging mode of a database to
                        broadcast. Usage: $ admintools -t re_ip -d <db_name>
                        -U
  -d DB, --database=DB  Name of a database. Required with the following
                        options: -O, -T, -U.
-------------------------------------------------------------------------
Usage: rebalance_data [options]

Options:
  -h, --help            show this help message and exit
  -d DBNAME, --dbname=DBNAME
                        database name
  -k KSAFETY, --ksafety=KSAFETY
                        specify the new k value to use
  -p PASSWORD, --password=PASSWORD
  --script              Don't re-balance the data, just provide a script for
                        later use.
-------------------------------------------------------------------------
Usage: restart_db [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to be restarted
  -e EPOCH, --epoch=EPOCH
                        Epoch at which the database is to be restarted. If
                        'last' is given as argument the db is restarted from
                        the last good epoch.
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  -k, --allow-fallback-keygen
                        Generate spread encryption key from Vertica. Use under
                        support guidance only.
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
-------------------------------------------------------------------------
Usage: restart_node [options]

Options:
  -h, --help            show this help message and exit
  -s HOSTS, --hosts=HOSTS
                        comma-separated list of hosts to be restarted
  -d DB, --database=DB  Name of database whose node is to be restarted
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  --new-host-ips=NEWHOSTS
                        comma-separated list of new IPs for the hosts to be
                        restarted
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
  -F, --force           force the node to start and auto recover if necessary
  --compat21            (deprecated) Use Vertica 2.1 method using node names
                        instead of hostnames
  --waitfordown-timeout=WAITTIME
                        Seconds to wait until nodes to be restarted are down
-------------------------------------------------------------------------
Usage: restart_subcluster [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database whose subcluster is to be restarted
  -c SCNAME, --subcluster=SCNAME
                        Name of subcluster to be restarted
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  -s NEWHOSTS, --hosts=NEWHOSTS
                        Comma separated list of new hosts to rebind to the
                        nodes
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
  -F, --force           Force the nodes in the subcluster to start and auto
                        recover if necessary
-------------------------------------------------------------------------
Usage: return_epoch [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database
  -p PASSWORD, --password=PASSWORD
                        Database password in single quotes
-------------------------------------------------------------------------
Usage: revive_db [options]

Options:
  -h, --help            show this help message and exit
  -s HOSTS, --hosts=HOSTS
                        comma-separated list of hosts to participate in
                        database
  -n NODEHOST, --node-and-host=NODEHOST
                        pair of nodename-hostname values delimited by "|" eg:
                        "v_testdb_node0001|10.0.0.1"Note: Each node-host pair
                        has to be specified as a new argument
  --communal-storage-location=COMMUNAL_STORAGE_LOCATION
                        Location of communal storage
  -x COMMUNAL_STORAGE_PARAMS, --communal-storage-params=COMMUNAL_STORAGE_PARAMS
                        Location of communal storage parameter file
  -d DBNAME, --database=DBNAME
                        Name of database to be revived
  --force               Force cleanup of existing catalog directory
  --display-only        Describe the database on communal storage, and exit
  --strict-validation   Print warnings instead of raising errors while
                        validating cluster_config.json
-------------------------------------------------------------------------
Usage: sandbox_subcluster [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to be modified
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  -c SCNAME, --subcluster=SCNAME
                        Name of subcluster to be sandboxed
  -b SBNAME, --sandbox=SBNAME
                        Name of the sandbox
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
-------------------------------------------------------------------------
Usage: set_restart_policy [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database for which to set policy
  -p POLICY, --policy=POLICY
                        Restart policy: ('never', 'ksafe', 'always')
-------------------------------------------------------------------------
Usage: set_ssl_params [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database whose parameters will be set
  -k KEYFILE, --ssl-key-file=KEYFILE
                        Path to SSL private key file
  -c CERTFILE, --ssl-cert-file=CERTFILE
                        Path to SSL certificate file
  -a CAFILE, --ssl-ca-file=CAFILE
                        Path to SSL CA file
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
-------------------------------------------------------------------------
Usage: show_active_db [options]

Options:
  -h, --help  show this help message and exit
-------------------------------------------------------------------------
Usage: start_db [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to be started
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
  -F, --force           force the database to start at an epoch before data
                        consistency problems were detected.
  -U, --unsafe          Start database unsafely,  skipping recovery. Use under
                        support guidance only.
  -k, --allow-fallback-keygen
                        Generate spread encryption key from Vertica. Use under
                        support guidance only.
  -s HOSTS, --hosts=HOSTS
                        comma-separated list of hosts to be started
  --fast                Attempt fast startup on un-encrypted eon db. Fast
                        startup will use startup information from
                        cluster_config.json
-------------------------------------------------------------------------
Usage: stop_db [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to be stopped
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  -F, --force           Force the databases to shutdown, even if users are
                        connected.
  -z, --if-no-users     Only shutdown if no users are connected.
                        If any users are connected, exit with an error.
  -n DRAIN_SECONDS, --drain-seconds=DRAIN_SECONDS
                        Eon db only: seconds to wait for user connections to close.
                        Default value is 60 seconds.
                        When the time expires, connections will be forcibly closed
                        and the db will shut down.
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
-------------------------------------------------------------------------
Usage: stop_host [options]

Options:
  -h, --help            show this help message and exit
  -s HOSTS, --hosts=HOSTS
                        comma-separated list of hosts on which the vertica
                        process is to be killed using a SIGTERM signal
  --compat21            (deprecated) Use Vertica 2.1 method using node names
                        instead of hostnames
-------------------------------------------------------------------------
Usage: stop_node [options]

Options:
  -h, --help            show this help message and exit
  -s HOSTS, --hosts=HOSTS
                        comma-separated list of hosts on which the vertica
                        process is to be killed using a SIGTERM signal
  --compat21            (deprecated) Use Vertica 2.1 method using node names
                        instead of hostnames
-------------------------------------------------------------------------
Usage: stop_subcluster [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database whose subcluster is to be stopped
  -c SCNAME, --subcluster=SCNAME
                        Name of subcluster to be stopped
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  -n DRAIN_SECONDS, --drain-seconds=DRAIN_SECONDS
                        Seconds to wait for user connections to close.
                        Default value is 60 seconds.
                        When the time expires, connections will be forcibly closed
                        and the db will shut down.
  -F, --force           Force the subcluster to shutdown immediately,
                        even if users are connected.
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
-------------------------------------------------------------------------
Usage: uninstall_package [options]

Options:
  -h, --help            show this help message and exit
  -d DBNAME, --dbname=DBNAME
                        database name
  -p PASSWORD, --password=PASSWORD
                        database admin password
  -P PACKAGE, --package=PACKAGE
                        specify package or 'all' or 'default'
-------------------------------------------------------------------------
Usage: unsandbox_subcluster [options]

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database to be modified
  -p DBPASSWORD, --password=DBPASSWORD
                        Database password in single quotes
  -c SCNAME, --subcluster=SCNAME
                        Name of subcluster to be un-sandboxed
  --timeout=NONINTERACTIVE_TIMEOUT
                        set a timeout (in seconds) to wait for actions to
                        complete ('never') will wait forever (implicitly sets
                        -i)
  -i, --noprompts       do not stop and wait for user input(default false).
                        Setting this implies a timeout of 20 min.
-------------------------------------------------------------------------
Usage: upgrade_license_key --database mydb --license my_license.key
upgrade_license_key --install --license my_license.key

Updates the vertica license.

Without '--install', updates the license used by the database and
the admintools license cache.

With '--install', updates the license cache in admintools that
is used for creating new databases.

Options:
  -h, --help            show this help message and exit
  -d DB, --database=DB  Name of database. Cannot be used with --install.
  -l LICENSE, --license=LICENSE
                        Required - path to the license.
  -i, --install         When option is included, command will only update the
                        admintools license cache. Cannot be used with
                        --database.
  -p PASSWORD, --password=PASSWORD
                        Database password.
-------------------------------------------------------------------------
Usage: view_cluster [options]

Options:
  -h, --help            show this help message and exit
  -x, --xpand           show the full cluster state, node by node
  -d DB, --database=DB  filter the output for a single database