OpenText Analytics Database 26.2.x – Database functions

Sql-Reference: CLEAR_RESOURCE_REJECTIONS

Mon, 01 Jan 0001 00:00:00 +0000

Clears the content of the RESOURCE_REJECTIONS and DISK_RESOURCE_REJECTIONS system tables. Normally, these tables are only cleared during a node restart. This function lets you clear the tables whenever you need. For example, you might want to clear the system tables after you resolved a disk space issue that was causing disk resource rejections.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Immutable

Syntax

CLEAR_RESOURCE_REJECTIONS();

Privileges

Superuser

Examples

The following command clears the content of the RESOURCE_REJECTIONS and DISK_RESOURCE_REJECTIONS system tables:

=> SELECT clear_resource_rejections();
clear_resource_rejections
---------------------------
 OK
(1 row)

Sql-Reference: COMPACT_STORAGE

Mon, 01 Jan 0001 00:00:00 +0000

Bundles existing data (.fdb) and index (.pidx) files into the .gt file format. The .gt format is enabled by default for data files created version 7.2 or later. If you upgrade a database from an earlier version, use COMPACT_STORAGE to bundle storage files into the .gt format. Your database can continue to operate with a mix of file storage formats.

If the settings you specify for COMPACT_STORAGE vary from the limit specified in configuration parameter MaxBundleableROSSizeKB, OpenText™ Analytics Database does not change the size of the automatically created bundles.

Note

Run this function during periods of low demand.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

SELECT COMPACT_STORAGE ('[[[database.]schema.]object-name]', min-ros-filesize-kb, 'small-or-all-files', 'simulate');

Parameters

[database.]schema

Database and schema. The default schema is public. If you specify a database, it must be the current database.

object-name

Specifies the table or projection to bundle. If set to an empty string, COMPACT_STORAGE evaluates the data of all projections in the database for bundling.

min-ros-filesize-kb

Integer ≥ 1, specifies in kilobytes the minimum size of an independent ROS file. COMPACT_STORAGE bundles storage container ROS files below this size into a single file.

small-or-all-files

One of the following:

small: Bundles only files smaller than the limit specified in min-ros-filesize-kb
all: Bundles files smaller than the limit specified in min-ros-filesize-kb and bundles the .fdb and .pidx files for larger storage containers.

simulate

Specifies whether to simulate the storage settings and produce a report describing the impact of those settings.

true: Produces a report on the impact of the specified bundle settings without actually bundling storage files.
false: Performs the bundling as specified.

Privileges

Superuser

Storage and performance impact

Bundling reduces the number of files in your file system by at least fifty percent and improves the performance of file-intensive operations. Improved operations include backups, restores, and mergeout.

The database creates small files for the following reasons:

Tables contain hundreds of columns.
Partition ranges are small (partition by minute).
Local segmentation is enabled and your factor is set to a high value.

Examples

The following example describes the impact of bundling the table EMPLOYEES:

=> SELECT COMPACT_STORAGE('employees', 1024,'small','true');
Task: compact_storage

On node v_vmart_node0001:
Projection Name :public.employees_b0 | selected_storage_containers :0 |
selected_files_to_compact :0 | files_after_compact : 0 | modified_storage_KB :0

On node v_vmart_node0002:
Projection Name :public.employees_b0 | selected_storage_containers :1 |
selected_files_to_compact :6 | files_after_compact : 1 | modified_storage_KB :0

On node v_vmart_node0003:
Projection Name :public.employees_b0 | selected_storage_containers :2 |
selected_files_to_compact :12 | files_after_compact : 2 | modified_storage_KB :0

On node v_vmart_node0001:
Projection Name :public.employees_b1 | selected_storage_containers :2 |
selected_files_to_compact :12 | files_after_compact : 2 | modified_storage_KB :0

On node v_vmart_node0002:
Projection Name :public.employees_b1 | selected_storage_containers :0 |
selected_files_to_compact :0 | files_after_compact : 0 | modified_storage_KB :0

On node v_vmart_node0003:
Projection Name :public.employees_b1 | selected_storage_containers :1 |
selected_files_to_compact :6 | files_after_compact : 1 | modified_storage_KB :0

Success

(1 row)

Sql-Reference: DO_LOGROTATE_LOCAL

Mon, 01 Jan 0001 00:00:00 +0000

Rotates logs and removes rotated logs on the current node.

If the following files exceed the specified maximum size, they are rotated:

vertica.log
UDxFencedProcesses.log
MemoryReport.log
editor.log
dbLog

Rotated files are compressed and marked with a timestamp in the same location as the original log file: path/to/logfile.logtimestamp.gz. For example, /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log is rotated to /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log.2023-11-08-14-09-02-381909-05.gz.

If a log file was rotated, the previously rotated logs (.gz) in that directory are checked against the specified maximum age. Rotated logs older than the maximum age are deleted.

To view previous rotation events, see LOG_ROTATE_EVENTS

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

DO_LOGROTATE_LOCAL('[ max_size=log_size{K|M|G|T};max_age=log_age;force=force_value ]')

Parameters

max_size=log_size{K|M|G|T}: String, the maximum size of logs (.log) to keep, where K is kibibytes, M is mebibytes, G is gibibytes, and T is tebibytes. This overrides the LogRotateMaxSize parameter.
Default: The default (not current) value of LogRotateMaxSize
max_age=log_age: Interval literal of rotated logs (.gz) to keep. This overrides the LogRotateMaxAge configuration parameter. If the unit is not specified, the unit is assumed to be days.
Default: The default (not current) value of LogRotateMaxAge
force=force_value: Boolean, whether to force rotation, ignoring the maximum size. You can also specify true by specifying force without the boolean value.
Default: false

Privileges

Superuser

Examples

To rotate logs that are larger than 1 kilobyte, and then remove rotated logs that are older than 1 day:

=> SELECT do_logrotate_local('max_size=1K;max_age=1 day');

                                             do_logrotate_local
-----------------------------------------------------------------------------------------------------------
 Doing Logrotate
Considering file /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log
File size: 35753 Bytes
Force rotate? no
Renaming to /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log.2023-11-08-13-55-51-651129-05
Opening new log file /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log
Compressing /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log.2023-11-08-13-55-51-651129-05 to /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log.2023-11-08-13-55-51-651129-05.gz
Done with /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log

Considering file /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log
File size: 68 Bytes
Force rotate? no
Rotation not required for file /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log
Done with /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log
(1 row)

To force rotation and then remove all logs older than 4 days (default value of LogRotateMaxAge):

=> SELECT do_logrotate_local('force;max_age=4 days');

                                             do_logrotate_local
-----------------------------------------------------------------------------------------------------------
 Doing Logrotate
Considering file /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log
File size: 4310245 Bytes
Force rotate? yes
Renaming to /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log.2023-11-10-13-45-15-53837-05
Opening new log file /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log
Compressing /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log.2023-11-10-13-45-15-53837-05 to /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log.2023-11-10-13-45-15-53837-05.gz
Done with /scratch_b/qa/VMart/v_vmart_node0001_catalog/vertica.log

Considering file /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log
File size: 68 Bytes
Force rotate? yes
Remove old log file /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log.2023-11-06-13-18-27-23141-05.gz
Remove old log file /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log.2023-11-07-13-18-30-059008-05.gz
Remove old log file /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log.2023-11-08-13-47-11-707903-05.gz
Remove old log file /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log.2023-11-09-14-09-02-386402-05.gz
Renaming to /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log.2023-11-10-13-45-15-647762-05
Opening new log file /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log
Compressing /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log.2023-11-10-13-45-15-647762-05 to /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log.2023-11-10-13-45-15-647762-05.gz
Done with /scratch_b/qa/VMart/v_vmart_node0001_catalog/UDxLogs/UDxFencedProcesses.log


(1 row)

Sql-Reference: DUMP_LOCKTABLE

Mon, 01 Jan 0001 00:00:00 +0000

Returns information about deadlocked clients and the resources they are waiting for.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

DUMP_LOCKTABLE()

Privileges

None

Notes

Use DUMP_LOCKTABLE if OpenText™ Analytics Database becomes unresponsive:

Open an additional vsql connection.
Execute the query:
```
=> SELECT DUMP_LOCKTABLE();
```
The output is written to vsql. See Monitoring the Log Files.

You can also see who is connected using the following command:

=> SELECT * FROM SESSIONS;

Close all sessions using the following command:

=> SELECT CLOSE_ALL_SESSIONS();

Close a single session using the following command:

=> SELECT CLOSE_SESSION('session_id');

You get the session_id value from the V_MONITOR.SESSIONS system table.

Sql-Reference: DUMP_PARTITION_KEYS

Mon, 01 Jan 0001 00:00:00 +0000

Dumps the partition keys of all projections in the system.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

DUMP_PARTITION_KEYS( )

Note

The ROS objects of partitioned tables without partition keys are ignored by the tuple mover and are not merged during automatic tuple mover operations.

Privileges

User must have select privileges on the table or usage privileges on the schema.

Examples

=> SELECT DUMP_PARTITION_KEYS( );
Partition keys on node v_vmart_node0001
  Projection 'states_b0'
   Storage [ROS container]
     No of partition keys: 1
     Partition keys: NH
   Storage [ROS container]
     No of partition keys: 1
     Partition keys: MA
  Projection 'states_b1'
   Storage [ROS container]
     No of partition keys: 1
     Partition keys: VT
   Storage [ROS container]
     No of partition keys: 1
     Partition keys: ME
   Storage [ROS container]
     No of partition keys: 1
     Partition keys: CT

Sql-Reference: GET_CONFIG_PARAMETER

Mon, 01 Jan 0001 00:00:00 +0000

Gets the value of a configuration parameter at the specified level. If no value is set at that level, the function returns an empty row.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

GET_CONFIG_PARAMETER( 'parameter-name' [, 'level' | NULL] )

Parameters

parameter-name

Name of the configuration parameter value to get.

level

Level at which to get parameter-name's setting, one of the following string values:

user: Current user
session: Current session
node-name: Name of database node

If level is omitted or set to NULL, GET_CONFIG_PARAMETER returns the database setting.

Privileges

None

Examples

Get the AnalyzeRowCountInterval parameter at the database level:

=> SELECT GET_CONFIG_PARAMETER ('AnalyzeRowCountInterval');
 GET_CONFIG_PARAMETER
----------------------
 3600

Get the MaxSessionUDParameterSize parameter at the session level:

=> SELECT GET_CONFIG_PARAMETER ('MaxSessionUDParameterSize','session');
 GET_CONFIG_PARAMETER
----------------------
 2000
(1 row)

Get the UseDepotForReads parameter at the user level:

=> SELECT GET_CONFIG_PARAMETER ('UseDepotForReads', 'user');
 GET_CONFIG_PARAMETER
----------------------
 1
(1 row)

Sql-Reference: KERBEROS_CONFIG_CHECK

Mon, 01 Jan 0001 00:00:00 +0000

Tests the Kerberos configuration of an OpenText™ Analytics Database cluster. The function succeeds if it can kinit with both the keytab file and the current user's credential and reports errors otherwise.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

KERBEROS_CONFIG_CHECK( )

Parameters

This function has no parameters.

Privileges

This function does not require privileges.

Examples

The following example shows the results when the Kerberos configuration is valid.

=> SELECT KERBEROS_CONFIG_CHECK();
    kerberos_config_check
-----------------------------------------------------------------------------
 ok: krb5 exists at [/etc/krb5.conf]
 ok: Vertica Keytab file is set to [/etc/vertica.keytab]
 ok: Vertica Keytab file exists at [/etc/vertica.keytab]
[INFO] KerberosCredentialCache [/tmp/vertica_D4/vertica450676899262134963.cc]
 Kerberos configuration parameters set in the database
        KerberosServiceName : [vertica]
        KerberosHostname : [data.hadoop.com]
        KerberosRealm : [EXAMPLE.COM]
        KerberosKeytabFile : [/etc/vertica.keytab]
 Vertica Principal: [vertica/data.hadoop.com@EXAMPLE.COM]
 [OK] Vertica can kinit using keytab file
 [OK] User [bob] has valid client authentication for kerberos principal [bob@EXAMPLE.COM]]

(1 row)

Sql-Reference: MEMORY_TRIM

Mon, 01 Jan 0001 00:00:00 +0000

Calls glibc function malloc_trim() to reclaim free memory from malloc and return it to the operating system. Details on the trim operation are written to system table MEMORY_EVENTS.

Unless you turn off memory polling, OpenText™ Analytics Database automatically detects when glibc accumulates an excessive amount of free memory in its allocation arena. When this occurs, the database consolidates much of this memory and returns it to the operating system. Call this function if you disable memory polling and wish to reduce glibc-allocated memory manually.

For more information, see Memory trimming.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

MEMORY_TRIM()

Privileges

Superuser

Examples

=> SELECT memory_trim();
                           memory_trim
-----------------------------------------------------------------
 Pre-RSS: [378822656] Post-RSS: [372129792] Benefit: [0.0176675]
(1 row)

Sql-Reference: PURGE

Mon, 01 Jan 0001 00:00:00 +0000

Permanently removes delete vectors from ROS storage containers so disk space can be reused. PURGE removes all historical data up to and including the Ancient History Mark epoch.

PURGE does not delete temporary tables.

Caution

PURGE can temporarily use significant disk space.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

SELECT PURGE()

Privileges

Table owner
USAGE privilege on schema

Examples

After you delete data from an OpenText™ Analytics Database table, that data is marked for deletion. To see the data that is marked for deletion, query system table DELETE_VECTORS.

Run PURGE to remove the delete vectors from ROS containers.

=> SELECT * FROM test1;
 number
--------
      3
     12
     33
     87
     43
     99
(6 rows)
=> DELETE FROM test1 WHERE number > 50;
 OUTPUT
--------
      2
(1 row)
=> SELECT * FROM test1;
 number
--------
     43
      3
     12
     33
(4 rows)
=> SELECT node_name, projection_name, deleted_row_count FROM DELETE_VECTORS;
    node_name     | projection_name | deleted_row_count
------------------+-----------------+-------------------
 v_vmart_node0002 | test1_b1        |                 1
 v_vmart_node0001 | test1_b1        |                 1
 v_vmart_node0001 | test1_b0        |                 1
 v_vmart_node0003 | test1_b0        |                 1
(4 rows)
=> SELECT PURGE();
...
(Table: public.test1) (Projection: public.test1_b0)
(Table: public.test1) (Projection: public.test1_b1)
...
(4 rows)

After the ancient history mark (AHM) advances:

=> SELECT * FROM DELETE_VECTORS;
 (No rows)

Sql-Reference: RUN_INDEX_TOOL

Mon, 01 Jan 0001 00:00:00 +0000

Runs the Index tool on an OpenText™ Analytics Database to perform one of these tasks:

Run a per-block cyclic redundancy check (CRC) on data storage to verify data integrity.
Check that the sort order in ROS containers is correct.

The function writes summary information about its operation to standard output; detailed information on results is logged in vertica.log on the current node. For more about evaluating tool output, see:

You can also run the Index tool on a database that is down, from the Linux command line. For details, see CRC and sort order check.

Caution

Use this function only under guidance from customer support.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

RUN_INDEX_TOOL ( 'taskType', global, '[projFilter]' [, numThreads ] );

Parameters

taskType

Specifies the operation to run, one of the following:

checkcrc: Run a cyclic redundancy check (CRC) on each block of existing data storage to check the data integrity of ROS data blocks.
checksort: Evaluate each ROS row to determine whether it is sorted correctly. If ROS data is not sorted correctly in the projection's order, query results that rely on sorted data will be incorrect.

global

Boolean, specifies whether to run the specified task on all nodes (true), or the current one (false).

projFilter

Specifies the scope of the operation:

Empty string (''): Run the check on all projections.
A string that specifies one or more projections as follows:
- projection-name: Run the check on this projection
- projection-prefix*: Run the check on all projections that begin with the string projection-prefix.

numThreads

An unsigned (positive) or signed (negative) integer that specifies the number of threads used to run this operation:

n: Number of threads, ≥ 1
-n: Negative integer, denotes a fraction of all CPU cores as follows:
```
num-cores / n
```
Thus, -1 specifies all cores, -2, half the cores, -3, a third of all cores, and so on.

Default: 1

Privileges

Superuser

Optimizing performance

You can optimize meta-function performance by setting two parameters:

projFilter: Narrows the scope of the operation to one or more projections.
numThreads: Specifies the number of threads used to execute the function.

Sql-Reference: SECURITY_CONFIG_CHECK

Mon, 01 Jan 0001 00:00:00 +0000

Returns the status of various security-related parameters. Use this function to verify completeness of your TLS configuration.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

SECURITY_CONFIG_CHECK( 'db-component' )

Parameters

db-component: The component to check. Currently, NETWORK is the only supported component.
NETWORK: Returns the status and parameters for spread encryption, internode TLS, and client-server TLS.

Examples

In this example, SECURITY_CONFIG_CHECK shows that spread encryption and data channel TLS are disabled because EncryptSpreadComm is disabled and the data_channel TLS Configuration is not configured.

Similarly, client-server TLS is disabled because the TLS Configuration "server" has a server certificate, but its TLSMODE is disabled. Setting TLSMODE to 'Enable' enables server mode client-server TLS. See TLS protocol for details.

=> SELECT SECURITY_CONFIG_CHECK('NETWORK');
                                            SECURITY_CONFIG_CHECK
----------------------------------------------------------------------------------------------------------------------
Spread security details:
* EncryptSpreadComm = []
Spread encryption is disabled
It is NOT safe to set/change other security config parameters while spread is not encrypted!
Please set EncryptSpreadComm to enable spread encryption first

Data Channel security details:
 TLS Configuration 'data_channel' TLSMODE is DISABLE
TLS on the data channel is disabled
Please set EncryptSpreadComm and configure TLS Configuration 'data_channel' to enable TLS on the data channel

Client-Server network security details:
* TLS Configuration 'server' TLSMODE is DISABLE
* TLS Configuration 'server' has a certificate set
Client-Server TLS is disabled
To enable Client-Server TLS set a certificate on TLS Configuration 'server' and/or set the tlsmode to 'ENABLE' or higher

(1 row)

Sql-Reference: SET_CONFIG_PARAMETER

Mon, 01 Jan 0001 00:00:00 +0000

Sets or clears a configuration parameter at the specified level.

Important

You can only use this function to set configuration parameters with string or integer values. To set configuration parameters that accept other data types, use the appropriate ALTER statement.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

SET_CONFIG_PARAMETER( 'param-name', { param-value | NULL}, ['level'| NULL])

Arguments

param-name

Name of the configuration parameter to set.

param-value

Value to set for param-name, either a string or integer. If a string, enclose in single quotes; if an integer, single quotes are optional.

To clear param-name at the specified level, set to NULL.

level

Level at which to set param-name, one of the following string values:

user: Current user.
session: Current session, overrides the database setting.
node-name: Name of database node, overrides session and database settings.

If level is omitted or set to NULL, param-name is set at the database level.

Note

Some parameters require restart for the value to take effect.

Privileges

Superuser

Examples

Set the AnalyzeRowCountInterval parameter to 3600 at the database level:

=> SELECT SET_CONFIG_PARAMETER('AnalyzeRowCountInterval',3600);
    SET_CONFIG_PARAMETER
----------------------------
 Parameter set successfully
(1 row)

Note

You can achieve the same result with ALTER DATABASE:

ALTER DATABASE DEFAULT SET PARAMETER AnalyzeRowCountInterval = 3600;

Set the MaxSessionUDParameterSize parameter to 2000 at the session level.

=> SELECT SET_CONFIG_PARAMETER('MaxSessionUDParameterSize',2000,'SESSION');
    SET_CONFIG_PARAMETER
----------------------------
 Parameter set successfully
(1 row)

Sql-Reference: SET_SPREAD_OPTION

Mon, 01 Jan 0001 00:00:00 +0000

Changes spread daemon settings. This function is mainly used to set the timeout before spread assumes a node has gone down.

Note

Changing Spread settings with SET_SPREAD_OPTION has minor impact on your cluster as it pauses while the new settings are propagated across the cluster. Because of this delay, changes to the Spread timeout are not immediately visible in system table SPREAD_STATE.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

SET_SPREAD_OPTION( option-name, option-value )

Parameters

option-name: String containing the spread daemon setting to change.
Currently, this function supports only one option: TokenTimeout. This setting controls how long spread waits for a node to respond to a message before assuming it is lost. See Adjusting Spread Daemon timeouts for virtual environments for more information.
option-value: The new setting for option-name.

Examples

=> SELECT SET_SPREAD_OPTION( 'TokenTimeout', '35000');
NOTICE 9003:  Spread has been notified about the change
                   SET_SPREAD_OPTION
--------------------------------------------------------
 Spread option 'TokenTimeout' has been set to '35000'.

(1 row)

=> SELECT * FROM V_MONITOR.SPREAD_STATE;
    node_name     | token_timeout
------------------+---------------
 v_vmart_node0001 |         35000
 v_vmart_node0002 |         35000
 v_vmart_node0003 |         35000
(3 rows);

Sql-Reference: SHUTDOWN

Mon, 01 Jan 0001 00:00:00 +0000

Shuts down an OpenText™ Analytics Database. By default, the shutdown fails if any users are connected. You can check the status of the shutdown operation in the vertica.log file.

In Eon Mode, you can call SHUTDOWN_WITH_DRAIN to perform a graceful shutdown that drains client connections and then shuts down the database.

Tip

Before calling SHUTDOWN, you can close all current user connections and prevent further connection attempts as follows:

Temporarily set configuration parameter MaxClientSessions to 0.
Call CLOSE_ALL_SESSIONS to close all non-dbamin connections.

This is a meta-function. You must call meta-functions in a top-level SELECT statement.

Behavior type

Volatile

Syntax

SHUTDOWN ( [ 'false' | 'true' ] )

Parameters

false: Default, returns a message if users are connected and aborts the shutdown.
true: Forces the database to shut down, disallowing further connections.

Privileges

Superuser

Examples

The following command attempts to shut down the database. Because users are connected, the command fails:

=> SELECT SHUTDOWN('false');
NOTICE:  Cannot shut down while users are connected
          SHUTDOWN
-----------------------------
 Shutdown: aborting shutdown
(1 row)

OpenText Analytics Database 26.2.x – Database functions

Sql-Reference: CLEAR_RESOURCE_REJECTIONS

Behavior type

Syntax

Privileges

Examples

See also

Sql-Reference: COMPACT_STORAGE

Note

Behavior type

Syntax

Parameters

Privileges

Storage and performance impact

Examples

Sql-Reference: DO_LOGROTATE_LOCAL

Behavior type

Syntax

Parameters

Privileges

Examples

Sql-Reference: DUMP_LOCKTABLE

Behavior type

Syntax

Privileges

Notes

See also

Sql-Reference: DUMP_PARTITION_KEYS

Behavior type

Syntax

Note

Privileges

Examples

See also

Sql-Reference: GET_CONFIG_PARAMETER

Behavior type

Syntax

Parameters

Privileges

Examples

See also

Sql-Reference: KERBEROS_CONFIG_CHECK

Behavior type

Syntax

Parameters

Privileges

Examples

Sql-Reference: MEMORY_TRIM

Behavior type

Syntax

Privileges

Examples

Sql-Reference: PURGE

Caution

Behavior type

Syntax

Privileges

Examples

See also

Sql-Reference: RUN_INDEX_TOOL

Caution

Behavior type

Syntax

Parameters

Privileges

Optimizing performance

Sql-Reference: SECURITY_CONFIG_CHECK

Behavior type

Syntax

Parameters

Examples

See also

Sql-Reference: SET_CONFIG_PARAMETER

Important

Behavior type

Syntax

Arguments

Note

Privileges

Examples