Configure your network

• 1: Create a placement group, key pair, and VPC
• 2: Network ACL settings
• 3: Configure TCP keepalive with AWS network load balancer
• 4: Create and assign an internet gateway
• 5: Assign an elastic IP address
• 6: Create a security group

1 - Create a placement group, key pair, and VPC

Part of configuring your network for AWS is to create the following:

• Placement Group

• Key Pair

• Virtual Private Cloud (VPC)

Create a placement group

A placement group is a logical grouping of instances in a single Availability Zone. Placement Groups are required for clusters and all Vertica nodes must be in the same Placement Group.

Vertica recommends placement groups for applications that benefit from low network latency, high network throughput, or both. To provide the lowest latency, and the highest packet-per-second network performance for your Placement Group, choose an instance type that supports enhanced networking.

For information on creating placement groups, see Placement Groups in the AWS documentation.

Create a key pair

You need a key pair to access your instances using SSH. Create the key pair using the AWS interface and store a copy of your key (*.pem) file on your local machine. When you access an instance, you need to know the local path of your key.

Use a key pair to:

• Authenticate your connection as dbadmin to your instances from outside your cluster.

• Install and configure Vertica on your AWS instances.

for information on creating a key pair, see Amazon EC2 Key Pairs in the AWS documentation.

Create a virtual private cloud (VPC)

You create a Virtual Private Cloud (VPC) on Amazon so that you can create a network of your EC2 instances. Your instances in the VPC all share the same network and security settings.

A Vertica cluster on AWS must be logically located in the same network. Create a VPC to ensure the nodes in you cluster can communicate with each other in AWS.

Create a single public subnet VPC with the following configurations:

• Assign a Network Access Control List (ACL) that is appropriate to your situation.

• Enable DNS resolution and enable DNS hostname support for instances launched in this VPC.

• Add the required network inbound and outbound rules to the Network ACL associated to the VPC.

For information on creating a VPC, see Create a Virtual Private Cloud (VPC) in the AWS documentation.

2 - Network ACL settings

Vertica requires the following basic network access control list (ACL) settings on an AWS instance running the Vertica AMI. Vertica recommends that you secure your network with additional ACL settings that are appropriate to your situation.

Inbound Rules

Outbound Rules

You can use the entire port range specified in the previous table, or find your specific ephemeral ports by entering the following command:

$ cat /proc/sys/net/ipv4/ip_local_port_range

More information

For detailed information on network ACLs within AWS, refer to Network ACLs in the Amazon documentation.

For detailed information on ephemeral ports within AWS, refer to Ephemeral Ports in the Amazon documentation.

3 - Configure TCP keepalive with AWS network load balancer

AWS supports three types of elastic load balancers (ELBs):

•Classic Load Balancers

•Application Load Balancers

•Network Load Balancers

Vertica strongly recommends the AWS Network Load Balancer (NLB), which provides the best performance with your Vertica database. The Network Load Balancer acts as a proxy between clients (such as JDBC) and Vertica servers. The Classic and Application Load Balancers do not work with Vertica, in Enterprise Mode or Eon Mode.

To avoid timeouts and hangs when connecting to Vertica through the NLB, it is important to understand how AWS NLB handles idle timeouts for connections. For the NLB, AWS sets the idle timeout value to 350 seconds and you cannot change this value. The timeout applies to both connection points.

For a long-running query, if either the client or the server fails to send a timely keepalive, that side of the connection is terminated. This can lead to situations where a JDBC client hangs waiting for results that would never be returned because the server fails to send a keepalive within 350 seconds.

To identify an idle timeout/keepalive issue, run a query like this via a client such as JDBC:

=> SELECT SLEEP(355);

If there’s a problem, one of the following situations occurs:

• The client connection terminates before 355 seconds. In this case, lower the JDBC keepalive setting so that keepalives are sent less than 350 seconds apart.

• The client connection doesn’t return a result after 355 seconds. In this case, you need to adjust the server keepalive settings (tcp_keepalive_time and tcp_keepalive_intvl) so that keepalives are sent less than 350 seconds apart.

For detailed information about AWS Network Load Balancers, see What is a Network Load Balancer? in the AWS documentation.

4 - Create and assign an internet gateway

When you create a VPC, an Internet gateway is automatically assigned to it. You can use that gateway, or you can assign your own. If you are using the default Internet gateway, continue with the procedure described in Create a security group.

Otherwise, create an Internet gateway specific to your needs. Associate that internet gateway with your VPC and subnet.

For information about how to create an Internet Gateway, see Internet Gateways in the AWS documentation.

5 - Assign an elastic IP address

An elastic IP address is an unchanging IP address that you can use to connect to your cluster externally. Vertica recommends you assign a single elastic IP to a node in your cluster. You can then connect to other nodes in your cluster from your primary node using their internal IP addresses dictated by your VPC settings.

Create an elastic IP address. For information, see Elastic IP Addresses in the AWS documentation.

6 - Create a security group

The Vertica AMI has specific security group requirements. When you create a Virtual Private Cloud (VPC), AWS automatically creates a default security group and assigns it to the VPC. You can use the default security group, or you can name and assign your own.

Create and name your own security group using the following basic security group settings. You may make additional modifications based on your specific needs.

Inbound

Outbound

For information about what a security group is, as well as how to create one, see Amazon EC2 Security Groups for Linux Instances in the AWS documentation.