This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Designing for K-safety

Vertica recommends that all production databases have a minimum K-safety of one (K=1).

Vertica recommends that all production databases have a minimum K-safety of one (K=1). Valid K-safety values for production databases are 1 and 2. Non-production databases do not have to be K-safe and can be set to 0.

A K-safe database must have at least three nodes, as shown in the following table:

K-safety level Number of required nodes
1 3+
2 5+

You can set K-safety to 1 or 2 only when the physical schema design meets certain redundancy requirements. See Requirements for a K-safe physical schema design.

Using Database Designer

To create designs that are K-safe, Vertica recommends that you use the Database Designer. When creating projections with Database Designer, projection definitions that meet K-safe design requirements are recommended and marked with a K-safety level. Database Designer creates a script that uses the MARK_DESIGN_KSAFE function to set the K-safety of the physical schema to 1. For example:

=> \i VMart_Schema_design_opt_1.sql
CREATE PROJECTION
CREATE PROJECTION
mark_design_ksafe
----------------------
Marked design 1-safe
(1 row)

By default, Vertica creates K-safe superprojections when database K-safety is greater than 0.

Monitoring K-safety

Monitoring tables can be accessed programmatically to enable external actions, such as alerts. You monitor the K-safety level by querying the SYSTEM table for settings in columns DESIGNED_FAULT_TOLERANCE and CURRENT_FAULT_TOLERANCE.

Loss of K-safety

When K nodes in your cluster fail, your database continues to run, although performance is affected. Further node failures could potentially cause the database to shut down if the failed node's data is not available from another functioning node in the cluster.

See also

K-safety in an Enterprise Mode database

1 - Requirements for a K-safe physical schema design

Database Designer automatically generates designs with a K-safety of 1 for clusters that contain at least three nodes.

Database Designer automatically generates designs with a K-safety of 1 for clusters that contain at least three nodes. (If your cluster has one or two nodes, it generates designs with a K-safety of 0. You can modify a design created for a three-node (or greater) cluster, and the K-safe requirements are already set.

If you create custom projections, your physical schema design must meet the following requirements to be able to successfully recover the database in the event of a failure:

You can use the MARK_DESIGN_KSAFE function to find out whether your schema design meets requirements for K-safety.

2 - Requirements for a physical schema design with no K-safety

If you use Database Designer to generate an comprehensive design that you can modify and you do not want the design to be K-safe, set K-safety level to 0 (zero).

If you use Database Designer to generate an comprehensive design that you can modify and you do not want the design to be K-safe, set K-safety level to 0 (zero).

If you want to start from scratch, do the following to establish minimal projection requirements for a functioning database with no K-safety (K=0):

  1. Define at least one superprojection for each table in the logical schema.

  2. Replicate (define an exact copy of) each dimension table superprojection on each node.

3 - Designing segmented projections for K-safety

Projections must comply with database K-safety requirements.

Projections must comply with database K-safety requirements. In general, you must create buddy projections for each segmented projection, where the number of buddy projections is K+1. Thus, if system K-safety is set to 1, each projection segment must be duplicated by one buddy; if K-safety is set to 2, each segment must be duplicated by two buddies.

Automatic creation of buddy projections

You can use CREATE PROJECTION so it automatically creates the number of buddy projections required to satisfy K-safety, by including SEGMENTED BY ... ALL NODES. If CREATE PROJECTION specifies K-safety (KSAFE=n), Vertica uses that setting; if the statement omits KSAFE, Vertica uses system K-safety.

In the following example, CREATE PROJECTION creates segmented projection ttt_p1 for table ttt. Because system K-safety is set to 1, Vertica requires a buddy projection for each segmented projection. The CREATE PROJECTION statement omits KSAFE, so Vertica uses system K-safety and creates two buddy projections: ttt_p1_b0 and ttt_p1_b1:

=> SELECT mark_design_ksafe(1);

  mark_design_ksafe
----------------------
 Marked design 1-safe
(1 row)

=> CREATE TABLE ttt (a int, b int);
WARNING 6978:  Table "ttt" will include privileges from schema "public"
CREATE TABLE

=> CREATE PROJECTION ttt_p1 as SELECT * FROM ttt SEGMENTED BY HASH(a) ALL NODES;
CREATE PROJECTION

=> SELECT projection_name from projections WHERE anchor_table_name='ttt';
 projection_name
-----------------
 ttt_p1_b0
 ttt_p1_b1
(2 rows)

Vertica automatically names buddy projections by appending the suffix _bn to the projection base name—for example ttt_p1_b0.

Manual creation of buddy projections

If you create a projection on a single node, and system K-safety is greater than 0, you must manually create the number of buddies required for K-safety. For example, you can create projection xxx_p1 for table xxx on a single node, as follows:

=> CREATE TABLE xxx (a int, b int);
WARNING 6978:  Table "xxx" will include privileges from schema "public"
CREATE TABLE

=> CREATE PROJECTION xxx_p1 AS SELECT * FROM xxx SEGMENTED BY HASH(a) NODES v_vmart_node0001;
CREATE PROJECTION

Because K-safety is set to 1, a single instance of this projection is not K-safe. Attempts to insert data into its anchor table xxx return with an error like this:

=> INSERT INTO xxx VALUES (1, 2);
ERROR 3586:  Insufficient projections to answer query
DETAIL:  No projections that satisfy K-safety found for table xxx
HINT:  Define buddy projections for table xxx

In order to comply with K-safety, you must create a buddy projection for projection xxx_p1. For example:

=> CREATE PROJECTION xxx_p1_buddy AS SELECT * FROM xxx SEGMENTED BY HASH(a) NODES v_vmart_node0002;
CREATE PROJECTION

Table xxx now complies with K-safety and accepts DML statements such as INSERT:

VMart=> INSERT INTO xxx VALUES (1, 2);
 OUTPUT
--------
      1
(1 row)

See also

For general information about segmented projections and buddies, see Segmented projections. For information about designing for K-safety, see Designing for K-safety and Designing for segmentation.

4 - Designing unsegmented projections for K‑Safety

In many cases, dimension tables are relatively small, so you do not need to segment them.

In many cases, dimension tables are relatively small, so you do not need to segment them. Accordingly, you should design a K-safe database so projections for its dimension tables are replicated without segmentation on all cluster nodes. You create these projections with a CREATE PROJECTION statement that includes the keywords UNSEGMENTED ALL NODES. These keywords specify to create identical instances of the projection on all cluster nodes.

The following example shows how to create an unsegmented projection for the table store.store_dimension:


=> CREATE PROJECTION store.store_dimension_proj (storekey, name, city, state)
             AS SELECT store_key, store_name, store_city, store_state
             FROM store.store_dimension
             UNSEGMENTED ALL NODES;
CREATE PROJECTION

Vertica uses the same name to identify all instances of the unsegmented projection—in this example, store.store_dimension_proj. The keyword ALL NODES specifies to replicate the projection on all nodes:


=> \dj store.store_dimension_proj
                         List of projections
 Schema |         Name         |  Owner  |       Node       | Comment
--------+----------------------+---------+------------------+---------
 store  | store_dimension_proj | dbadmin | v_vmart_node0001 |
 store  | store_dimension_proj | dbadmin | v_vmart_node0002 |
 store  | store_dimension_proj | dbadmin | v_vmart_node0003 |
(3 rows)

For more information about projection name conventions, see Projection naming.